Specs
Cutterbar
| |
|---|
| Cutting width ft. in. (m) |
| Cutterbar model |
| Number of discs |
| Knives per disc |
| Disc speed @ 540 rpm PTO speed rpm |
| Tilt angle degrees |
| Flotation |
| Drive method |
| Cutting height in. (mm) |
| Cutting height w/optional high-stubble shoes in. (mm) |
| Cutting height w/optional adjustable shoes in. (mm) |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 9’ 2” (2.8) | 10’ 4” (3.16) |
| MowMax™ Modular Cutterbar with ShockPRO™ hubs | MowMax™ Modular Cutterbar with ShockPRO™ hubs |
| 7 | 8 |
| 2 | 2 |
| 3000 | 3000 |
| 2° - 10° | 2° - 10° |
| Up & back, adjustable springs | Up & back, adjustable springs |
| PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar | PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar |
| 1.1-2.7 (29-68) | Flail Tine: 1.1-2.7 (29-68) or Roll: .95-2.4 (24-60) |
| 2.25-4.5 (58-115) | 2.25-4.5 (58-115) |
| 2.25-4.5 (58-115) | 2.25-4.5 (58-115) |
Roll Conditioners
| |
|---|
| Type |
| Length / Diameter in. (mm) |
| Drive method |
| Speed rpm |
| Conditioner roll tension adjustment |
| Conditioner gap adjustment |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| Chevron intermeshing rubber | Chevron intermeshing rubber or steel rolls |
| 90 (2286) / 10.4 (264) | 102 (2591) / 10.4 (264) |
| 4 HB V-belt and enclosed gears | 4 HB V-belt and enclosed gears |
| 647 | 647 |
| Single crank | Single crank |
| Adjustable drawbolt stop, each end | Adjustable drawbolt stop, each end |
LeaningEdge Flail Conditioners
| |
|---|
| Type |
| Length / Diameter in. (mm) |
| Drive method |
| Speed rpm |
| Conditioner gap adjustment |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| Flail rotor with 90 tapered flails | Flail rotor with 100 tapered flails |
| 90 (2286) / 22 (560) | 102 (2591) / 22 (560) |
| 4 HB v-belt | 4 HB v-belt |
| 718 std. 1000 opt. | 718 std. 1000 opt. |
| Single crank adjustable rotor hood | Single crank adjustable rotor hood |
Crop Discharge
| |
|---|
| Swath width ft. (m) |
| Windrow width ft. (m) |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 6 (1.83) | 7 (2.13) |
| 3-6 (0.9-1.83) | 3-7 (0.9-2.13) |
Driveline
| |
|---|
| Input speed rpm |
| Driveline protection |
| Secondary driveline |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 540 | 540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment |
| Slip clutch and overrunning clutch assembly at rear of PTO shaft | Slip clutch and overrunning clutch assembly at rear of PTO shaft |
| Non-CV driveline | Double CV Driveline - Head repositionable under load |
Tongue Options
| |
|---|
| Type |
| Hitch type |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| Side-pull, straight tongue | Side-pull, curved tongue |
| Drawbar with CV PTO | Standard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch |
Tractor Requirements
| |
|---|
| Minimum PTO power required hp (kW) |
| Hydraulic circuits required |
| Minimum relief pressure required psi (bar) |
| Drawbar |
| Swivel Hitch - Drawbar |
| Swivel Hitch - 2-Point |
| Electrical |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 65 (49) | 80 (60) |
| 2 | 2 |
| 1500 (103) | 1500 (103) |
| ASAE Category II | ASAE Category II |
| — | ASAE Category II or III |
| — | ASAE Category II, III-N, or III |
| 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights |
Tires
| |
|---|
| Tubeless ag rib implement tires |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 9.5L x 14L 6PR | Standard hitch and flail conditioner: 9.5L x 14 6PR/ Swivel hitch and roll conditioner: 11L x 15 6PR |
Transport Speed
| |
|---|
| Max road speed mph (kph) |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 20 (32) | 20 (32) |
Dimensions*
| |
|---|
| Width, transport ft. in. (m) |
| Width , operating ft. in. (m) |
| Length, transport ft. in. (m) |
| Length, operating ft. in. (m) |
| Height ft. in. (m) |
| Ground clearance with head fully raised in. (mm) |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| 9’ 11” (3.02) | 11’ 3” (3.42) |
| 14’ 10” (4.52) | 16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped |
| Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)*** | Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)*** |
| Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)*** | Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)*** |
| Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35) | Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35) |
| 17 (4.32) | Flail Tine: 17 (4.32) or Roll: 18 (4.57) |
Weights**
| |
|---|
| Operating weight lbs. (kg.) |
| Discbine® 209 Discbine® 209 | Discbine® 210 Discbine® 210 |
|---|---|
| Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)*** | Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)*** |
