Specs
- UPC 193308000794
- Onboard Intelligence RED Technology
- Starter Electric
- Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
- Caster Forks .50" thick caster yoke arms.
- Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
- Drive Tires 26x12-12, 6ply
- Parking Brake Lever-actuated internal wet disc brake.
- Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
- Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
- Electrical 12-volt battery with 55-amp alternator.
- Standard Features 12-volt plug-in, engine hour meter and cup holder
- Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Transmission Speeds Infinitely Variable
- Engine Brand YANMAR
- Engine Brand Yanmar
- Engine Model 3TNV80FT
- Engine Displacement 1267
- Transmission Hydrostatic
- Engine Series TNV
- Fuel System Electronically Governed IDI Turbo Diesel
- Speed Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
- Drive Hydro-Drive
- Engine Spec ZMTR1
- Engine Speed 2,600 RPM
- Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
- Fuel Capacity 12-gallon (45.4-L), side fuel tanks
- Drive Description Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler.
- Fuel Type Diesel
- PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
- Drive Wheel Release Allows unit movement without engine running.
- Fuel Indicator Yes - mechanical float type
- Deck Lift Hydraulic
- Carb Compliant Yes
- Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS 2-post foldable ROPS standard with seat belt and latch.
- Deck Style Floating Deck
- Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to install finish cut baffle kit.
- Width / Cutting Deck 72"
- Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
- Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
- Blade Tip Speed Approximately 18,500 fpm
- Blades 3 Blades at 24.50" Length
- Width 78.2 in. (198.6 cm)
- Height 71.8 in. (182.4 cm)
- Length 100.6 in. (255.5 cm)
- Curb Weight 2041
Black Side Bumper(requires 3231-7 & 104-8301)
Black Side Bumper(requires 3231-7 & 104-8301
Buy NowFinish Cut Baffles
Maximize cut quality in the toughest conditions with this finish cut baffle kit.
Buy NowAir Ride Suspension Seat
Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.
Buy NowFull Suspension Seat
This low-profile, full- suspension seat enhances operator comfort and lumbar support by adjusting to individual weight.
Buy NowWhite Non-Marking Side Bumper (requires 3231-7 & 104-8301)
White Non-Marking Side Bumper(requires 3231-7 & 104-8301)
Buy NowSun Shade
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
Buy NowAnti-Scalp and Side Wear Bar
Protect your rear discharge cutting deck from impact, and your turf from tearing. This kit gives you peace of mind when mowing in tight spaces. The tapered anti-scalp roller help to prevent turf gouging in sharp turns.
Buy NowJack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
Jack Mount Receiver
RECEIVER-JACK MOUNT - Lazer Diesel
Buy NowTrash Container (Not compatible with 135-7076)
Trash container (NLZD)
Buy NowSlow Moving Vehicle Sign
Slow moving sign kit (NLZD)
Buy NowFlasher Light
LIGHT KIT
Buy NowRear Guard and Bumper
Protect your engine and enhance the appearance of your machine with this rear guard and bumper kit.
Hitch
Hitch kit (NLZD)
Buy NowLight Kit, LED (not compatible with 135-2473)
LIGHT KIT