Kohler Command PRO EFI ECV740

Contact us for price

Stock status: Call Store for Availability

If you want lower operating costs and less downtime, the fuel-sipping KOHLER® Command PRO® EFI is your engine. Closed-loop electronic fuel injection saves you big on gas and covers more ground between fill ups.*

  • Saves significantly on fuel, with less downtime for refueling*
  • 3-year unlimited-hour limited commercial warranty
  • Advanced sensor technology allows engine to optimize performance by automatically adapting to operating conditions
  • Starts like your car – just turn the key and go
  • EFI Diagnostic Software provides quick and easy troubleshooting to minimize downtime

Specs

Engine Type

4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block, electronic fuel injection

Model Command PRO EFI ECV740
Power[1] kw (hp) 18.6(25)
Displacement cm3 (in3) 747 (45)
Bore mm (in) 83 (3.3)
Stroke mm (in) 69 (2.7)
Gross Torque[1] Nm (lb-ft) 54.1 (39.9)
Compression Ratio 9.1:1
Dry Weight kg (lbs) 49 (108)
Oil Capacity L (US qt) 1.9 (2)
Lubrication Full pressure w/full-flow filter
Dimensions LxWxH mm (in) 541 x 470 x 447
(21.3 x 18.5 x 17.6)
Backpressure Limit[2] 50
Certified Power[3] kw (hp) 18 (24.2)
Certified rpm rpm 3600
Emissions Compliance

  • EPA Phase III
  • EU Stage V
  • CARB Phase III
  • China Phase II

Engine Type Commercial

Length is front to rear of engine. Width is valve cover to valve cover. Height is mounting surface to top of air cleaner.

1 Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.

2 Inches of H20 @ 3600 RPM WOT

3 J1995 power and torque certified by 3rd Party Witness